是用51hei单片机开发板 电路图详见：http://www.51hei.com/f/51hei-5.pdf 的数码管部分， 用2个74hc573 锁存，p0口作为数据口 ，p3.6和p3.7分别是段和位的锁存端口.
- #include<reg52.h>
- #define uchar unsigned char
- #define uint unsigned int
- uchar code SEG7[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
- sbit D=P3^6;
- sbit V=P3^7;
- //==================
- void delay(uint k)
- {
- uint i,j;
- for(i=0;i<k;i++){
- for(j=0;j<121;j++)
- {;}}
- }
- //================
- void main(void)
- {
- uchar m=0,n=0,i;
- for(i=0;i<250;i++)
- {
- D=1;
- P0=SEG7[n];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfb;
- V=0;
- delay(4);
- D=1;
- P0=SEG7[m];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfd;
- V=0;
- delay(4);
- }
- //==========
- {
- uchar m=8,x=6;
- for(i=0;i<250;i++)
- {
- D=1;
- P0=SEG7[n];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfb;
- V=0;
- delay(4);
- D=1;
- P0=SEG7[m];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfd;
- V=0;
- delay(4);
- D=1;
- P0=SEG7[x];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfe;
- V=0;
- delay(4);
- }
- }
- //=========
- for(i=0;i<250;i++)
- {
- D=1;
- P0=SEG7[n];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfb;
- V=0;
- delay(4);
- D=1;
- P0=SEG7[m];
- D=0;
- P0=0xff;
- V=1;
- P0=0xfd;
- V=0;
- delay(4);
- }
- D=1;
- P0=0x00;
- D=0;
- while(1);
- }
|
QQ好友和群
QQ空间
腾讯微博
腾讯朋友
收藏
淘帖
顶
踩
