找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 3342|回复: 1
收起左侧

stm32串口1简单通信程序

[复制链接]
ID:215173 发表于 2017-6-27 16:17 | 显示全部楼层 |阅读模式
#include "stm32f10x.h"
#include <delay.h>
#include <led.h>
void My_USART1_Init(void)
{
USART_InitTypeDef USART_InitStruct;
GPIO_InitTypeDef GPIO_InitStruct;
NVIC_InitTypeDef NVIC_InitStruct;

RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 , ENABLE);
GPIO_InitStruct.GPIO_Mode=GPIO_Mode_AF_PP;
GPIO_InitStruct.GPIO_Pin= GPIO_Pin_9;
GPIO_InitStruct.GPIO_Speed=GPIO_Speed_10MHz;
GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.GPIO_Mode=GPIO_Mode_IN_FLOATING;
GPIO_InitStruct.GPIO_Pin=GPIO_Pin_10;
GPIO_InitStruct.GPIO_Speed=GPIO_Speed_10MHz;
GPIO_Init(GPIOA, &GPIO_InitStruct);

USART_InitStruct.USART_BaudRate=115200;
USART_InitStruct.USART_HardwareFlowControl=USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode=USART_Mode_Rx|USART_Mode_Tx;
USART_InitStruct.USART_Parity=USART_Parity_No;
USART_InitStruct.USART_StopBits=USART_StopBits_1 ;
USART_InitStruct.USART_WordLength=USART_WordLength_8b;               
USART_Init(USART1, &USART_InitStruct);
USART_Cmd(USART1, ENABLE);

USART_ITConfig(USART1, USART_IT_RXNE , ENABLE);
NVIC_InitStruct.NVIC_IRQChannel=USART1_IRQn;
NVIC_InitStruct.NVIC_IRQChannelCmd=ENABLE;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority=1;
NVIC_InitStruct.NVIC_IRQChannelSubPriority=1;
NVIC_Init(&NVIC_InitStruct);
}
void USART1_IRQHandler(void)
{u8 res;
if(USART_GetITStatus(USART1, USART_IT_RXNE))
{res=USART_ReceiveData(USART1);
  USART_SendData(USART1, res);
        GPIO_ResetBits(GPIOF,GPIO_Pin_7);
}
}
int main(void)
{
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2 );
My_USART1_Init();
LED_GPIO_Config();
while(1);
}


回复

使用道具 举报

ID:423894 发表于 2018-11-10 00:19 | 显示全部楼层
收藏学习一下谢谢分享
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

手机版|小黑屋|51黑电子论坛 |51黑电子论坛6群 QQ 管理员QQ:125739409;技术交流QQ群281945664

Powered by 单片机教程网

快速回复 返回顶部 返回列表