光立方原理图和PCB及源程序全套资料下载

ID:140725 · 发表于 2016-10-20 20:00

自己做的光立方的pcb文件和原理图，已经打样而且运行成功了的.下面有很多实物图片

LED板.rar (515.61 KB, 下载次数: 139)

2016-10-20 19:58 上传

点击文件名下载附件
共阳极的光立方程序：

动画程序.rar (4.15 KB, 下载次数: 88)

2016-10-20 19:58 上传

点击文件名下载附件

驱动电路PCB.pdf (871.21 KB, 下载次数: 72)

2016-10-20 19:58 上传

点击文件名下载附件

驱动板和LED板是分开的

212059cjn5z99i5bpvov84.jpg.thumb.jpg

下面是原理图：

源程序：

/*Ideasoft
http://2013mcu.taobao.com/
edition:v1
Display memery:display[8][8];
*/
#include "reg52.h"
#define uchar unsigned char
#define uint unsigned int
uchar xdata display[8][8];
/*rank:A,1,2,3,4,I,D?,U*/
uchar code table_cha[8][8]={0x51,0x51,0x51,0x4a,0x4a,0x4a,0x44,0x44,0x18,0x1c,0x18,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0x66,0x30,0x18,0xc,0x6,0xf6,0x3c,0x66,0x60,0x38,0x60,0x60,0x66,0x3c,0x30,0x38,0x3c,0x3e,0x36,0x7e,0x30,0x30,0x3c,0x3c,0x18,0x18,0x18,0x18,0x3c,0x3c,0x66,0xff,0xff,0xff,0x7e,0x3c,0x18,0x18,0x66,0x66,0x66,0x66,0x66,0x66,0x7e,0x3c};
/*the "ideasoft"*/
uchar code table_id[40]={0x81,0xff,0x81,0x00,0xff,0x81,0x81,0x7e,0x00,0xff,0x89,0x89,0x00,0xf8,0x27,0x27,0xf8,0x00,0x8f,0x89,0x89,0xf9,0x00,0xff,0x81,0x81,0xff,0x00,0xff,0x09,0x09,0x09,0x01,0x0,0x01,0x01,0xff,0x01,0x01,0x00};
/*railway*/
uchar code dat[128]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x6f,0x8f,0x93,0x73,0x6f,0x8f,0x93,0x73,0x4a,0x6a,0x8a,0xaa,0xae,0xb2,0xb6,0x96,0x76,0x56,0x52,0x4e,0x25,0x45,0x65,0x85,0xa5,0xc5,0xc9,0xcd,0xd1,0xd5,0xd9,0xb9,0x99,0x79,0x59,0x39,0x35,0x31,0x2d,0x29,0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4};
/*railway 2*/
uchar code dat2[28]={0x0,0x20,0x40,0x60,0x80,0xa0,0xc0,0xe0,0xe4,0xe8,0xec,0xf0,0xf4,0xf8,0xfc,0xdc,0xbc,0x9c,0x7c,0x5c,0x3c,0x1c,0x18,0x14,0x10,0xc,0x8,0x4};
/*railway 3*/
uchar code dat3[24]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x65,0x64,0x63,0x62,0x61,0x60,0x50,0x40,0x30,0x20,0x10};
/*3p char*/
uchar code table_3p[3][8]={0xff,0x89,0xf5,0x93,0x93,0xf5,0x89,0xff,0x0e,0x1f,0x3f,0x7e,0x7e,0x3f,0x1f,0x0e,0x18,0x3c,0x7e,0xff,0x18,0x18,0x18,0x18};
/*initializtion
That is to initialize the program .
It is write to set the timer in c52 mcu.
So the program can renovate the led_3d_cube in fixed time use the interrupt function.*/
void sinter()
{
IE=0x82;
TCON=0x01;
TH0=0xc0;
TL0=0;
TR0=1;
}
void delay5us(void) //误差 -0.026765046296us STC 1T 22.1184Mhz
{
unsigned char a,b;
for(b=3;b>0;b--)
for(a=1;a>0;a--);
}
void delay(uint i)
{
while (i--){delay5us();}//12t的mcu 注释这个延时即可
}
/*To judge the num bit*/
uchar judgebit(uchar num,uchar b)
{
char n;
num=num&(1<<b);
if (num)
n=1;
else
n=0;
return n;
}
/*To figure out the round number*/
uchar abs(uchar a)
{
uchar b;
b=a/10;
a=a-b*10;
if (a>=5)
b++;
return b;
}
/*To figure out the absolute value*/
uchar abss(char a)
{
if (a<0)
a=-a;
return a;
}
/*The function can comparat the character.
And remove the big one to the back.*/
void max(uchar *a,uchar *b)
{
uchar t;
if ((*a)>(*b))
{
t=(*a);
(*a)=(*b);
(*b)=t;
}
}
/*The function is to figure out the max number and return it.*/
uchar maxt(uchar a,uchar b,uchar c)
{
if (a<b)
a=b;
if (a<c)
a=c;
return a;
}
void clear(char le)
{
uchar i,j;
for (j=0;j<8;j++)
{
for (i=0;i<8;i++)
display[j][i]=le;
}
}
void trailler(uint speed)
{
char i,j;
for (i=6;i>=-3;i--)
{
if (i>=0)
{
for (j=0;j<8;j++)
display[j][i]=display[j][i+1];
}
if (i<4)
{
for (j=0;j<8;j++)
display[j][i+4]=0;
}
delay(speed);
}
}
void point(uchar x,uchar y,uchar z,uchar le)
{
uchar ch1,ch0;
ch1=1<<x;
ch0=~ch1;
if (le)
display[z][y]=display[z][y]|ch1;
else
display[z][y]=display[z][y]&ch0;
}
void type(uchar cha,uchar y)
{
uchar xx;
for (xx=0;xx<8;xx++)
{
display[xx][y]=table_cha[cha][xx];
}
}
/*The first variable is the distance from the midpoint.
The second is the layer.
the third is the flash speed of the time between each two point.
The forth is the enable io,it controls weather draw or claen.*/
void cirp(char cpp,uchar dir,uchar le)
{
uchar a,b,c,cp;
if ((cpp<128)&(cpp>=0))
{
if (dir)
cp=127-cpp;
else
cp=cpp;
a=(dat[cp]>>5)&0x07;
b=(dat[cp]>>2)&0x07;
c=dat[cp]&0x03;
if (cpp>63)
c=7-c;
point (a,b,c,le);
}
}
void line(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar le)
{
char t,a,b,c,a1,b1,c1,i;
a1=x2-x1;
b1=y2-y1;
c1=z2-z1;
t=maxt(abss(a1),abss(b1),abss(c1));
a=x1*10;
b=y1*10;
c=z1*10;
a1=a1*10/t;
b1=b1*10/t;
c1=c1*10/t;
for (i=0;i<t;i++)
{
point(abs(a),abs(b),abs(c),le);
a+=a1;
b+=b1;
c+=c1;
}
point(x2,y2,z2,le);
}
void box(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le)
{
uchar i,j,t=0;
max(&x1,&x2);
max(&y1,&y2);
max(&z1,&z2);
for (i=x1;i<=x2;i++)
t|=1<<i;
if (!le)
t=~t;
if (fill)
{
if (le)
{
for (i=z1;i<=z2;i++)
{
for (j=y1;j<=y2;j++)
display[j][i]|=t;
}
}
else
{
for (i=z1;i<=z2;i++)
{
for (j=y1;j<=y2;j++)
display[j][i]&=t;
}
}
}
else
{
if (le)
{
display[y1][z1]|=t;
display[y2][z1]|=t;
display[y1][z2]|=t;
display[y2][z2]|=t;
}
else
{
display[y1][z1]&=t;
display[y2][z1]&=t;
display[y1][z2]&=t;
display[y2][z2]&=t;
}
t=(0x01<<x1)|(0x01<<x2);
if (!le)
t=~t;
if (le)
{
for (j=z1;j<=z2;j+=(z2-z1))
{
for (i=y1;i<=y2;i++)
display[i][j]|=t;
}
for (j=y1;j<=y2;j+=(y2-y1))
{
for (i=z1;i<=z2;i++)
display[j][i]|=t;
}
}
else
{
for (j=z1;j<=z2;j+=(z2-z1))
{
for (i=y1;i<=y2;i++)
{
display[i][j]&=t;
}
}
for (j=y1;j<=y2;j+=(y2-y1))
{
for (i=z1;i<=z2;i++)
{
display[j][i]&=t;
}
}
}
}
}
void box_apeak_xy(uchar x1,uchar y1,uchar z1,uchar x2,uchar y2,uchar z2,uchar fill,uchar le)
{
uchar i;
max(&z1,&z2);
if (fill)
{
for (i=z1;i<=z2;i++)
{
line (x1,y1,i,x2,y2,i,le);
}
}
else
{
line (x1,y1,z1,x2,y2,z1,le);
line (x1,y1,z2,x2,y2,z2,le);
line (x2,y2,z1,x2,y2,z2,le);
line (x1,y1,z1,x1,y1,z2,le);
}
}
void poke(uchar n,uchar x,uchar y)
{
uchar i;
for (i=0;i<8;i++)
{
point(x,y,i,judgebit(n,i));
}
}
void boxtola(char i,uchar n)
{
if ((i>=0)&(i<8))
{
poke(n,0,7-i);
}
if ((i>=8)&(i<16))
{
poke(n,i-8,0);
}
if ((i>=16)&(i<24))
{
poke(n,7,i-16);
}
}
void rolldisplay(uint speed)
{
uchar j;
char i,a;
for (i=23;i>-40;i--)
{
for (j=0;j<40;j++)
{
a=i+j;
if ((a>=0)&(a<24))
boxtola(a,table_id[j]);
}
delay(speed);
}
}
void roll_apeak_yz(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<7;i++)
{
display[i][7]=0;
display[7][6-i]=255;
delay(speed);
};
break;
case 2:
for (i=0;i<7;i++)
{
display[7][7-i]=0;
display[6-i][0]=255;
delay(speed);
};
break;
case 3:
for (i=0;i<7;i++)
{
display[7-i][0]=0;
display[0][i+1]=255;
delay(speed);
};
break;
case 0:
for (i=0;i<7;i++)
{
display[0][i]=0;
display[i+1][7]=255;
delay(speed);
};
}
}
void roll_apeak_xy(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<7;i++)
{
line(0,i,0,0,i,7,0);
line(i+1,7,0,i+1,7,7,1);
delay(speed);
};
break;
case 2:
for (i=0;i<7;i++)
{
line(i,7,0,i,7,7,0);
line(7,6-i,0,7,6-i,7,1);
delay(speed);
};
break;
case 3:
for (i=0;i<7;i++)
{
line(7,7-i,0,7,7-i,7,0);
line(6-i,0,0,6-i,0,7,1);
delay(speed);
};
break;
case 0:
for (i=0;i<7;i++)
{
line(7-i,0,0,7-i,0,7,0);
line(0,i+1,0,0,i+1,7,1);
delay(speed);
};
}
}
void roll_3_xy(uchar n,uint speed)
{
uchar i;
switch(n)
{
case 1:
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7,7-i,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (3,3,0,0,i,7,1,0);
};
break;
case 2:
for (i=0;i<8;i++)
{
box_apeak_xy (7-i,0,0,i,7,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (3,4,0,i,7,7,1,0);
};
break;
case 3:
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7,7-i,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (4,4,0,7,7-i,7,1,0);
};
break;
case 0:
for (i=0;i<8;i++)
{
box_apeak_xy (7-i,0,0,i,7,7,1,1);
delay(speed);
if (i<7)
box_apeak_xy (4,3,0,7-i,0,7,1,0);
};
}
}
void trans(uchar z,uint speed)
{
uchar i,j;
for (j=0;j<8;j++)
{
for (i=0;i<8;i++)
{
display[z][i]>>=1;
}
delay(speed);
}
}
void tranoutchar(uchar c,uint speed)
{
uchar i,j,k,a,i2=0;
for (i=0;i<8;i++)
{
if (i<7)
box_apeak_xy (i+1,0,0,i+1,7,7,1,1);
box_apeak_xy (i2,0,0,i2,7,7,1,0);
a=0;
i2=i+1;
for (j=0;j<=i;j++)
{
a=a|(1<<j);
}
for (k=0;k<8;k++)
{
display[k][3]|=table_cha[c][k]&a;
display[k][4]|=table_cha[c][k]&a;
}
delay(speed);
}
}
void transss()
{
uchar i,j;
for (i=0;i<8;i++)
{
for (j=0;j<8;j++)
display[i][j]<<=1;
}
}
/*From now on,the function below is to display the flash.*/
void flash_1()
{
clear(0);
type(1,0);
delay(60000);
type(2,0);
delay(60000);
type(3,0);
delay(60000);
type(4,0);
delay(60000);
delay(60000);
clear(0);
rolldisplay(30000);
type(0,7);
delay(60000);
trailler(6000);
delay(60000);
}
void flash_2()
{
uchar i;
for (i=129;i>0;i--)
{
cirp(i-2,0,1);
delay(8000);
cirp(i-1,0,0);
}
delay(8000);
for (i=0;i<136;i++)
{
cirp(i,1,1);
delay(8000);
cirp(i-8,1,0);
}
delay(8000);
for (i=129;i>0;i--)
{
cirp(i-2,0,1);
delay(8000);
}
delay(8000);
for (i=0;i<128;i++)
{
cirp(i-8,1,0);
delay(8000);
}
delay(60000);
}
void flash_3()
{
char i;
for (i=0;i<8;i++)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i<7)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
for (i=7;i>=0;i--)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i>0)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
for (i=0;i<8;i++)
{
box_apeak_xy(0,i,0,7,i,7,1,1);
delay(20000);
if (i<7)
box_apeak_xy(0,i,0,7,i,7,1,0);
}
}
void flash_4()
{
char i,j,an[8];
for (j=7;j<15;j++)
an[j-7]=j;
for (i=0;i<=16;i++)
{
for (j=0;j<8;j++)
{
if ((an[j]<8)&(an[j]>=0))
line(0,an[j],j,7,an[j],j,1);
}
for (j=0;j<8;j++)
{
if (((an[j]+1)<8)&(an[j]>=0))
line(0,an[j]+1,j,7,an[j]+1,j,0);
}
for (j=0;j<8;j++)
{
if (an[j]>0)
an[j]--;
}
delay(15000);
}
for (j=0;j<8;j++)
an[j]=1-j;
for (i=0;i<=16;i++)
{
for (j=0;j<8;j++)
{
if ((an[j]<8)&(an[j]>=0))
line(0,an[j],j,7,an[j],j,1);
}
for (j=0;j<8;j++)
{
if (((an[j]-1)<7)&(an[j]>0))
line(0,an[j]-1,j,7,an[j]-1,j,0);
}
for (j=0;j<8;j++)
{
if (an[j]<7)
an[j]++;
}
delay(15000);
}
}
void flash_5()
{
uint a=15000;//a=delay
char i=8,j,an[4];
//1
for (j=7;j<11;j++)
an[j-7]=j;
while(i--)
{
for (j=0;j<4;j++)
{
if (an[j]<8)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<7)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>3)
an[j]--;
}
delay(a);
}
//2
i=3;
for (j=0;j<4;j++)
an[j]=5-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]<4)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<3)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>0)
an[j]--;
}
delay(a);
}
//3
i=3;
for (j=1;j<4;j++)
an[j]=4-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>0)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=1;j<4;j++)
{
if (an[j]<3)
an[j]++;
}
delay(a);
}
//4
i=3;
for (j=0;j<4;j++)
an[j]=j+1;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]>3)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>3)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=0;j<4;j++)
an[j]++;
delay(a);
}
//5
i=3;
for (j=3;j<6;j++)
an[j-2]=j;
while(i--)
{
for (j=1;j<4;j++)
{
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>3)
an[j]--;
}
delay(a);
}
//6
i=3;
for (j=0;j<4;j++)
an[j]=5-j;
while(i--)
{
for (j=1;j<4;j++)
{
if (an[j]<4)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]<3)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]>0)
an[j]--;
}
delay(a);
}
//7
i=3;
for (j=0;j<4;j++)
an[j]=3-j;
an[0]=2;
while(i--)
{
for (j=0;j<3;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>=0)
box_apeak_xy(j,an[j]+1,j,7-j,an[j]+1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (j<5-i)
an[j]--;
}
delay(a);
}
//8
i=10;
for (j=0;j<4;j++)
an[j]=j-2;
while(i--)
{
for (j=0;j<4;j++)
{
if (an[j]>=0)
box_apeak_xy(j,an[j],j,7-j,an[j],7-j,0,1);
if (an[j]>=0)
box_apeak_xy(j,an[j]-1,j,7-j,an[j]-1,7-j,0,0);
}
for (j=0;j<4;j++)
{
if (an[j]<7)
an[j]++;
}
delay(a);
}
}
void flash_6()
{
uchar i,j,k,z;
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
for (i=0;i<3;i++)
{
for (j=0;j<8;j++)
{
for (k=0;k<8;k++)
{
if ((table_3p[i][j]>>k)&1)
{
for (z=1;z<8;z++)
{
point (j,7-k,z,1);
if (z-1)
point (j,7-k,z-1,0);
delay(5000);
}
}
}
}
trans(7,15000);
}
}
void flash_7()
{
uchar i;
uint a=3000;
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_yz(3,10000);
roll_apeak_yz(0,10000);
roll_apeak_yz(1,10000);
roll_apeak_yz(2,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
roll_apeak_xy(2,10000);
roll_apeak_xy(3,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
roll_apeak_xy(2,10000);
roll_apeak_xy(3,10000);
for (i=0;i<8;i++)
{
box_apeak_xy (0,i,0,7-i,i,7,1,1);
delay(a);
}
delay(30000);
roll_3_xy(0,a);
delay(30000);
roll_3_xy(1,a);
delay(30000);
roll_3_xy(2,a);
delay(30000);
roll_3_xy(3,a);
delay(30000);
roll_3_xy(0,a);
delay(30000);
roll_3_xy(1,a);
delay(30000);
roll_3_xy(2,a);
delay(30000);
roll_3_xy(3,a);
for (i=7;i>0;i--)
{
box_apeak_xy(i,0,0,i,7,7,1,0);
delay(a);
}
}
void flash_8()
{
uchar i;
for (i=5;i<8;i++)
{
tranoutchar(i,10000);
delay(60000);
delay(60000);
}
}
void flash_9()
{
char i;
uchar j,an[8],x,y,t,x1,y1;
for (i=0;i<8;i++)
{
box_apeak_xy (i,0,0,i,7,7,1,1);
if (i)
box_apeak_xy (i-1,0,0,i-1,7,7,1,0);
delay(10000);
}
roll_apeak_xy(3,10000);
roll_apeak_xy(0,10000);
roll_apeak_xy(1,10000);
for (i=0;i<7;i++)
{
line(6-i,6-i,0,6-i,6-i,7,1);
line(i,7,0,i,7,7,0);
delay(10000);
}
for (i=0;i<8;i++)
an[i]=14;
for (i=0;i<85;i++)
{
clear(0);
for (j=0;j<8;j++)
{
t=an[j]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[j]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
line(x,y,j,x1,y1,j,1);
}
for (j=0;j<8;j++)
{
if ((i>j)&(j>i-71))
an[j]++;
}
delay(5000);
}
for (i=0;i<85;i++)
{
clear(0);
for (j=0;j<8;j++)
{
t=an[j]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[j]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
line(x,y,j,x1,y1,j,1);
}
for (j=0;j<8;j++)
{
if ((i>j)&(j>i-71))
an[j]--;
}
delay(5000);
}
for (i=0;i<29;i++)
{
clear(0);
t=an[0]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[0]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
box_apeak_xy(x,y,0,x1,y1,7,0,1);
box_apeak_xy(x,y,1,x1,y1,6,0,1);
an[0]++;
delay(5000);
}
for (i=0;i<16;i++)
{
clear(0);
t=an[0]%28;
x=dat2[t]>>5;
y=(dat2[t]>>2)&0x07;
t=(an[0]-14)%28;
x1=dat2[t]>>5;
y1=(dat2[t]>>2)&0x07;
box_apeak_xy(x,y,0,x1,y1,7,1,1);
an[0]--;
delay(5000);
}
for (i=0;i<8;i++)
{
line(i,i,0,0,0,i,0);
delay(5000);
}
for (i=1;i<7;i++)
{
line(i,i,7,7,7,i,0);
delay(5000);
}
for (i=1;i<8;i++)
{
clear(0);
box(7,7,7,7-i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(0,0,0,7-i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<8;i++)
{
clear(0);
box(0,0,0,i,i,i,0,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(7,0,0,i,7-i,7-i,0,1);
delay(10000);
}
for (i=1;i<8;i++)
{
box(7,0,0,7-i,i,i,1,1);
delay(10000);
}
for (i=1;i<7;i++)
{
clear(0);
box(0,7,7,7-i,i,i,1,1);
delay(10000);
}
}
void flash_10()
{
uchar i,j,an[4],x,y,t;
for (i=1;i<7;i++)
{
clear(0);
box(0,6,6,1,7,7,1,1);
box(i,6,6-i,i+1,7,7-i,1,1);
box(i,6,6,i+1,7,7,1,1);
box(0,6,6-i,1,7,7-i,1,1);
box(0,6-i,6,1,7-i,7,1,1);
box(i,6-i,6-i,i+1,7-i,7-i,1,1);
box(i,6-i,6,i+1,7-i,7,1,1);
box(0,6-i,6-i,1,7-i,7-i,1,1);
delay(30000);
}
for (i=0;i<4;i++)
{
an[i]=6*i;
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,y,0,x+1,y+1,1,1,1);
box(x,y,6,x+1,y+1,7,1,1);
}
for (j=0;j<4;j++)
an[j]++;
delay(10000);
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,y,0,x+1,y+1,1,1,1);
box(x,y,6,x+1,y+1,7,1,1);
}
for (j=0;j<4;j++)
an[j]--;
delay(10000);
}
for (i=0;i<35;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,0,y,x+1,1,y+1,1,1);
box(x,6,y,x+1,7,y+1,1,1);
}
for (j=0;j<4;j++)
an[j]++;
delay(10000);
}
for (i=0;i<36;i++)
{
clear(0);
for(j=0;j<4;j++)
{
t=an[j]%24;
x=dat3[t]>>4;
y=dat3[t]&0x0f;
box(x,0,y,x+1,1,y+1,1,1);
box(x,6,y,x+1,7,y+1,1,1);
}
for (j=0;j<4;j++)
an[j]--;
delay(10000);
}
for (i=6;i>0;i--)
{
clear(0);
box(0,6,6,1,7,7,1,1);
box(i,6,6-i,i+1,7,7-i,1,1);
box(i,6,6,i+1,7,7,1,1);
box(0,6,6-i,1,7,7-i,1,1);
box(0,6-i,6,1,7-i,7,1,1);
box(i,6-i,6-i,i+1,7-i,7-i,1,1);
box(i,6-i,6,i+1,7-i,7,1,1);
box(0,6-i,6-i,1,7-i,7-i,1,1);
delay(30000);
}
}
void flash_11()
{
uchar i,j,t,x,y;
uchar code daa[13]={0,1,2,0x23,5,6,7,6,5,0x23,2,1,0};
for (j=0;j<5;j++)
{
for (i=0;i<13;i++)
{
if (daa[i]>>4)
{
t=daa[i]&0x0f;
line (0,0,t+1,0,7,t+1,1);
}
else
t=daa[i];
line (0,0,t,0,7,t,1);
transss();
delay(10000);
}
}
for (j=1;j<8;j++)
{
if (j>3)
t=4;
else
t=j;
for (i=0;i<24;i+=j)
{
x=dat3[i]>>4;
y=dat3[i]&0x0f;
box_apeak_xy(0,x,y,0,x+1,y+1,1,1);
transss();
delay(10000);
}
}
for (j=1;j<8;j++)
{
if (j>3)
t=4;
else
t=j;
for (i=0;i<24;i+=j)
{
x=dat3[i]>>4;
y=dat3[i]&0x0f;
point (0,x,y,1);
transss();
delay(10000);
}
}
}
void main()
{
sinter();
clear(0);
/*play list*/
flash_1();
clear(0);
flash_2();
flash_3();
flash_4();
flash_4();
flash_5();
flash_5();
flash_6();
flash_7();
flash_8();
flash_9();
flash_10();
clear (0);
flash_11();
flash_9();
flash_5();
flash_7();
flash_5();
flash_6();
flash_8();
flash_9();
flash_10();
while(1);
}
void print() interrupt 1
{
uchar i;
static uchar layer=0;
P1=0xff;
for (i=0;i<8;i++)
{
P2=1<<i;
delay(3);
P1=~display[layer][i];
delay(3);
}
P0=1<<layer;
if (layer<8)
layer++;
else
layer=0;
TH0=0xc0;
TL0=0;
}

复制代码

ID:140725 · 发表于 2016-10-20 20:01

光立方呼吸灯程序

#include<reg52.h>
#define uint unsigned int
#define uchar unsigned char
int i=0;
uchar code table[]={
0,0,1,2,3,4,5,6,7,8,9,10,
11,12,13,14,15,16,17,18,
19,20,21,22,23,24,25,26,27,
28,29,30,31,32,33,34,35,36,
37,38,39,40,41,42,43,44,45,
46,47,48,49,50,51,52,53,54,
55,56,57,58,59,60,61,62,63,
64,65,66,67,68,69,70,71,72,
73,74,75,76,77,78,79,80,81,82,
83,84,85,86,87,88,89,90,91,
92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,
110,111,112,113,114,115,116,117,118,119,120,121,122,123,124};
void delay(uint z)
{
uint x,y;
for(x=15;x>0;x--)
for(y=z;y>0;y--);
}
void light1(uchar num1)
{
uchar j;
P2=0xff;
P1=0x00;
P2=0x00;
j = table[num1];
delay(j);
P2=0xff;
P1=0xff;
P2=0x00;
delay(126-j);
}
void light2(uchar num2)
{
uchar j;
P2=0xff;
P1=0xff;
P2=0x00;
j = table[num2];
delay(j);
P2=0xff;
P1=0x00;
P2=0x00;
delay(126-j);
}
void main()
{
while(1)
{ for(i=0;i<126;i++)
{
light2(i);
}
P2=0xff;
P1=0xff;
P2=0x00;
delay(100);
for(i=0;i<126;i++)
{
light1(i);
}
}
}

复制代码

ID:143958 · 发表于 2016-10-29 22:47

赞一个，做工很厉害啊

ID:94133 · 发表于 2017-11-7 20:11

这个是真心的赞。太好了

ID:164385 · 发表于 2018-10-13 14:09

很赞的制作，很棒啊！

ID:446674 · 发表于 2018-12-27 17:14

不错不错，这几天我一直想做一个，正在疯狂的搜集资料，多谢楼主

ID:436850 · 发表于 2019-8-11 09:57

赞👍，超棒

ID:510943 · 发表于 2019-12-4 15:42

请问，可不可以把器件清单可以发我一下呢？

邮箱1226231427@qq.com
万分感谢！

ID:612563 · 发表于 2020-4-24 10:34

用的是什么mcu

ID:612563 · 发表于 2020-4-30 15:18

很精妙

ID:704585 · 发表于 2020-5-3 14:06

多谢楼主分享

帐号		自动登录	找回密码
密码			立即注册

光立方原理图和PCB及源程序 全套资料下载

相关帖子

光立方原理图和PCB及源程序全套资料下载